Single Point Diamond Dressers, Natural Point Diamond Dressers, Bruted Point Diamond Dressers, Mumbai, India
FAIL (the browser should render some flash content, not this).

   
 
 

Single Point Diamond Dressers

Natural and Bruted Point

 
Single Point Diamond Dressers


Single point "bruted diamond" dressers are made with selected "Congo Rounds" mounted in a matrix.
A Single cutting edge is presented to the grinding wheel.
 
Diamonds for single point dressers are selected in accordance with quality and size. The question of using a superior, average or commercial quality, depends on the grinding finish required and the machines and working parameters.
 
We offer three grades namely A, B & C for all the diamond size, Availability: 0.25 Ct to 5.00 Ct

Natural Point Diamonds: The Diamond points are naturally formed. (Not man made like grades
A, B, & C) This is a gift of nature. Natural Point Diamond Dressers have high form retention properties. Availability: 0.10 Ct to 2.50 Ct

 
Guideline for Single-Point Diamond ressers :

Considerable care should be taken in mounting the diamond dresser in position. Diamonds are sensitive to shock and impact.
 
The dresser must be clamped rigidly in place to avoid vibration once dressing begins.
 
An ample supply of coolant should be directed at the diamond point before dressing begins, as the sudden application of coolant to the diamond once it has heated up can cause it to shatter.
 
The diamond holder should not be set directly on the center of the grinding wheel, but at an angle of
5-15 to the direction of rotation of the wheel so that it appears to be "trailing"
 
At normal wheel peripheral speeds, dressing rates of approximately 20-25 m/sec can be achieved.

The maximum depth of cut achieved per dressing pass is 0.03 mm or on fine grit wheels,
approximately 0.005-0.01 mm.

The cross feed rate is dependent upon grit size and can have a marked influence on the quality of the finish imparted to the grinding wheel surface. The lower the feed rate, the finer the surface finish.
We would recommend the following feed rates per revolution of the grinding wheel.

Grinding Wheel Grit Size Feed rate in mm/rev
30-46 0.60 -0.30
50 120 0.30  0.10
180  320 0.10  0.02

------------------------------------------------------------------------------------------------------------------------------------------------------------------------
   | ABOUT US  |  OUR  PROFILE |  OUR PRODUCTS |  CONTACT  US  |  FEEDBACK  |  TOPNEXT

| Home | Profile | About Us | Single Point Diamond Dressers | Throw - Away Diamond Dressers | Shaping Tools | Cluster Dressers | Multipoint Indexable Crown | Hexagonal Disc Diamond Dressers | Multipoint Disc | Diamond Grit Impregnated Dressers | Blade Type Dressers | Diamond Indenters | Diamond & C.B.N. Wheels | Diamond & CBN honing stone | Contact Us | Enquiry